Remove the Wi-Fi router at home. We are not particularly concerned about this. Especially IP addresses Leave on the service provider or IT.
We do not care about how to do the router properly, how to get a good connection. But with the slightest change, the Wi-Fi capability can increase.
Router to be kept in the right place: Wi-Fi coverage is not getting fit at home? Are there router places in your house? Remember, the home router's range is 100 feet. As a result, the place where the router placement is in central location is good. The distance from the wall can be kept away. Keep in mind, do not have mirrors or electrical components. If you take care of them, the signal will get better. Do not forget one more thing. Try, keep the router elevated. It is good, the height of your house, its height is three quarters.
A little older antenna: Antennas are a good way to keep an eye on the router. The antenna that you get with your router may not be good. Because at the cheap, sometimes good antennae is not possible. As a result, it is good if you buy antenna fits your router separately. Or buy booster antennas. In addition to the range of Wi-Fi, the energy will also increase.
Router software: There are software settings within router. Many times we do not care about it. Or do not interfere. To get a good connection, enter the router settings and change the settings. Remember, most routers work only on the default channel. In that case, if many router works in the same broadcast channel, the connection will not be good. So before setting up your router, fix the settings.
Install the Repeater in the Room: Yes, you can install Repeat to get the connection better. The work of the repeater is to take a signal from your Wi-Fi router. After that, pushing the front of it forward the range to increase. The smartphone will get a compact repeater in the size of the plug. In this case, keep in mind that the same Wi-Fi SSID is the name of the router and repeater. Then the router's IP address must be configured. Fix static I (IP) addresses.
Third-Party Hacks: You can apply two third-party hacks to increase router's signal and coverage area. The first one is the soft drinks aluminum cans Cut the cante into a parabolic form. Keep it with the router antenna. Can not use aluminum foil, if you can not do it.
Router Security: When the router is switched on, it will also need to change the required settings. For him, it is important to first know the IP address of the router. Open Command Prompt (Win + R then type cmd) for Windows PC. Type there ipconfig When the IP configuration is opened, go to 'Default Gateway' IP address. And if you have a MAC, open the Network eway 'IP address. Then go to Network Performance and copy the IP address. After typing the IP address of the router in the web browser, the user name and password will be asked. Generally, the admin and the password or both of the admin goes on writing. Unless it has changed before.
The name of Wi-Fi, security and password can be changed later. Select WPA2-AES for more secure networks. You can choose to stop broadcasting the Wi-Fi network. The network name will not show on any device. To connect manually, you need to know Wi-Fi's name and password. Most routers have settings for MAC ID filtering.
Lock Wi-Fi: You may have given a Wi-Fi password to some or some of your friends. Or, someone using your Wi-Fi service without your permission. To do so, you need to lock your Wi-Fi. Wireless Network Watcher can be easily captured by downloading. However, it works only in Windows. Show the name of each device being connected. In addition to their IP address. If it does not work, go to the router settings page, you can go to the connected device.