Welcome back, in this post I will talk about installing ros2 on the raspberry Pi3. For the install process we will be following the ros2 install from source guide. Here I will cover my choice of operating system and problems encountered during the process.
Choosing an Operating System
Long story short I ended up using Ubuntu 18.04.4 64bit Server Edition for raspberry Pi3. The entire pre-build process here went without incident.
I started off by using Raspbian Stretch both because it is a Linux OS designed specifically for the raspberry Pi3 and because it was already installed and running on my system. I ran into problems with python3 as ros2 needs version 3.6 and the package provided in stretch was 3.5.x. Instead of compiling python from scratch I looked for other operating systems
I briefly tried Ubuntu Core until I figured out I needed to connect to a remote server to get SSH keys and found it absurd and ditched it.
Build Process
- There was not enough memory to use the normal build commands. To get ros2 to compile I had to both add swap space and use a colcon command that allowed only building one project at a time.
- Ubuntu 18.04 server had no swap space by default so I added 4Gb using this guide
- I removed Rviz packages from the ros2 src folders since ubuntu server does not have a display.
- To actually build the system use the command
MAKEFLAGS="-j1 -l1" colcon build --symlink-install --executor sequential - Now just wait 6 - 8hrs because the build takes forever.
So far the tutorial programs are running so it all looks good so far.
Please like and subscribe.