The following items are needed in the installation of a new electric current
Before installing a new electrical installation, you must prepare some materials or items and components needed.
The following are some of the important components and materials needed.
""MCB
""Earth Leakage Circuit Breaker (ELCB)
""MCB and ELCB Box
""Switch
""Electric socket
""Power cable
""Isolation
""Pipe
""Embodus (junction box)
""Tedus
Measure the area of the house and the number of rooms
In order for the electric current to flow perfectly throughout the room, several long cables are needed.
Therefore, it is very important to measure or know the outside of all rooms before carrying out installation.
Knowing the amount and size of the existing space, we know how many contacts and cables are needed.
even so, the number of sockets in the room is usually seen from its function and use.
You need to know that for installing the socket yourself, make sure the installation distance is at least 130cm from the floor, this is intended to avoid the reach of children.
Knowing the size or size of Electric Power.
One of the important items that you cannot miss when installing electricity in any building is a miniature circuit breaker or what we usually call an MCB.
This item serves as an electric current protection system in anticipating excessive electric current.
By using the MCB the risk of short circuit to short circuit is very easy or can be overcome.
The greater the electrical power, the MCB that must be installed must be more than one.
The goal is that if there is minor damage, it does not spread to other installations.
Know the Right Electrical Installation Cable
How to install the next simple household installation is knowing the right wiring.
Make sure that the cables used are of SNI standard.
Home Electrical Installation Line Design
Approximately which room will you electrify?
For example, bedroom, kitchen, living room, family room, bathroom and much more.
Start Installing Main Line Cable
The installation of this main line is measured from the MCB box, then connected to the last socket.
This main cable can be installed on the roofs or above the ceiling so that it is not visible.
Connect the Switch Cable, Socket and Components
Furthermore, how to install a home electrical installation, namely, the cable from the main line is forwarded to the walls that have been broken down.
Such as, switches, sockets and lights.
Trial by Enabling MCB
The last stage of installing an electrical installation is activating the MCB.
After the MCB switch is in the on position…
Please turn on the switches and lights.
