How I Cut And Sew A Fish Tail gown.

Good evening hive family today day I will show you how I cut and sew another fish tail gown.
Here I have my Ankara material, zip,dull-face material, breast part, skin net, paper gum,and side flower.

First thing to do is to fold my material by two to remove the down part of the gown for the front part after that I place the front part on the other side of the material with my two inches allowance for my zip, and cut it out.

Next I cut my upper side of the gown by sixteen inches for the back side and my hand pit by eight inches, my neck length by seven inches and the wideness by five inches.

Then I proceeded to cut the front part of the gown by ten inches for the breast part and I remove six inches cause I will attaching my skin net at the top,

Then I cut out the pattern in the Ankara material cause I'll use it to design the front.

Then I cut out my hand using my baby lace by twenty two inches.

Then I proceeded to use my paper gum to gum the pattern using my iron.

After that I cut out my lining for each part that is needed and I proceed to fix it.

This is the back side after the lining for both the upper and down
part of the gown.

And this is the front part of the gown the upper side and the down part, and for the down part I cut out my dull face to just make a design.

After that I proceed to join the both side of the gown, fix my hand.

After lining up everything I proceed to iron before joining them together, and I fix my flower, the pattern I cut out from the Ankara and this is the outfit set to wear.

Thank you😊