Hola les cuento que ahora estoy poniéndome a subir mis piezas a tiktok y ya estoy teniendo nuevos seguidores fieles, dentro de esa dinámica una señora me escribió por qué le llamo la atención mi trabajo y quería que le hiciera el Salmo 91, ahí yo me pregunté ¿cómo que el salmo?, ¿debo hacer el salmo completo?, pero afortunadamente solo se trataba de escribir solo “Salmo 91”, de la misma forma que hago los nombres personalizados para joyería.
Sobre este salmo, es una invocación de la protección de Dios, para ser usado ante las fuerzas malignas y los tiempos difíciles.
Continuando con el tema de la pieza, el único detalle que representaría algo de problema, sería el tamaño reducido de la misma, bueno, igual más adelante cuando comente el proceso sabrán. Ahora, sobre la escogencia de la tipografía, decidí usar Canva en línea para no perder tiempo descargando e instalando las tipografías, después la pase al programa de diseño Inkscape las adapte un poco y las puse de un tamaño acorde para imprimir.
MATERIALES Y HERRAMIENTAS:
- Lamina cobre 1 mm, alambre de cobre 0.75 mm.
- Arco de segueta de joyería y sierras 2/0 para joyería.
- Dremel con eje flexible
- Fresa de 0.8 mm para abrir hueco
- Limas de joyería, lijas 220, 360 y 400
- Motor de banco, disco de tela y cera para pulir.
- Pinzas de joyería.
PROCESO
Como ven primero imprimí la palabra Salmo 91 en 3 distintos tamaños para que la clienta pudiera decidir cuál era el ideal, escogió el más pequeño, este lo recorte y pegue con pega blanca en un pedazo de lámina de 1 mm de cobre.
Perfore con el Dremel con fresa de 0,75 mm en los espacios internos, donde procedí a hacer los primeros cortes con la segueta y la sierra 2/0 y aproveche de abrir los huecos en los extremos superiores por donde se colocaran las argollas pequeñas.
Con el mismo arco de segueta corté la silueta de la palabra, quite la impresión, por lo que se aprecia en la imagen, aún queda mucho detalle por perfeccionar, el camino ahora en adelante es corregir con la misma segueta y se lleva tiempo por lo pequeña que es la pieza, así que me toco respirar, tener paciencia y no caer en el nerviosismo, porque cualquier salida de control significa que los cortes de segueta no se harán bien y podría dañar el trabajo. Pero como se puede apreciar, logre llevarlo a buen término de manera progresiva.
Después de los cortes pase a usar con las lijas 220, 360 y 400 que pase sobre la superficie, para después pasar al proceso de pulido en el motor de banco, el disco de tela y la cera de pulir, de último le incorpore las argollas.
Este es el resultado final después de mandar a darle el acabado en baño de plata, después se lo entregué a la señora y quedo feliz con el resultado. Espero a ustedes también les haya gustado el trabajo.
Sí quieren conocer más de mi trabajo
https://www.instagram.com/m16ueljoyas
--
Hello, I tell you that now I am starting to upload my pieces to Tiktok and I am already having new faithful followers, within that dynamic a lady wrote to me why I called her, my work caught my attention and she wanted me to do Psalm 91, there I asked myself, what about the psalm? Should I make the entire psalm? But fortunately it was just a matter of writing just “Psalm 91,” in the same way that I make personalized names for jewelry.
About this psalm, it is an invocation of God's protection, to be used against evil forces and difficult times.
Continuing with the theme of the piece, the only detail that would represent a bit of a problem would be its small size, well, maybe later when I comment on the process you will know. Now, about choosing the font, I decided to use Canva online so as not to waste time downloading and installing the fonts, then I transferred it to the Inkscape design program, adapted them a little and made them a suitable size for printing.
MATERIALS AND TOOLS:
- 1 mm copper sheet, 0.75 mm copper wire.
- Jewelry saw bow and 2/0 saws for jewelry.
- Dremel with flexible shaft
- 0.8 mm drill to open a hole
- Jewelry files, 220, 360 and 400 sandpapers
- Bench motor, cloth disc and polishing wax.
- Jewelry tweezers.
PROCESS
As you can see, first I printed the word Psalm 91 in 3 different sizes so that the client could decide which was the ideal one. She chose the smallest one. She cut it out and glued it with white glue on a piece of 1 mm copper sheet.
Drill with the Dremel with a 0.75 mm drill in the internal spaces, where I proceeded to make the first cuts with the saw and the 2/0 saw and take advantage of opening the holes at the upper ends where the small rings will be placed.
With the same arc of saw I cut the silhouette of the word, I removed the impression, as can be seen in the image, there is still a lot of detail to perfect, the way from now on is to correct with the same saw and it takes time so The piece is small, so I have to breathe, be patient and not get nervous, because any control outage means that the saw cuts will not be done well and could damage the work. But as you can see, I managed to bring it to fruition progressively.
After the cuts, use the 220, 360 and 400 sandpapers that you pass over the surface, and then move on to the polishing process on the bench motor, the cloth disc and the polishing wax, lastly add the rings. .
This is the final result after having it finished in silver plating, then I gave it to the lady and she was happy with the result. I hope you also liked the work.
If you want to know more about my work