Currently raspi08 a Raspberry Pi Zero - Version 1.3 is connected to an Adafruit Pi T-Cobbler Plus. I soldered a right angle connector to the RPi Zero so that it plugs into the T-Cobbler at a right angle and is visible when plugged into the breadboard.
As you can see the breadboard has a lot of components so that I can test various Python programs with hardware. The following different hardware components are on the breadboard:
- 3 single color LED's
- RGB LED
- relay
- DS18B20 one-wire temperature sensor
- 3 buttons
- Wi Nanchuck adapter