Good day, hivers. Today, I'm going to share my experience with the water purification equipment at the laboratory where I work.
This equipment is used to purify water for use in experiments in the laboratory, where the water must be free from contaminants and certain ions that could affect the analytical measurements conducted at the end of the process.
The first thing I did upon arriving at the room where the equipment was located was to turn on the turbine, which, by the way, makes a super annoying noise. Then, the water coming from the street is collected in a tank and, from there, under pressure, it goes through filters to undergo the purification processes.
Before starting, it's essential to check that the conductivity meter displays the correct time, as an error in the time could indicate that the equipment might be damaged. It's necessary to verify that the salts needed for the water's reaction are present in the meter, as this is part of its process.
The operation of the equipment is very straightforward; it's like using a touch-screen cellphone. You simply tell the equipment how many liters you want it to purify, and water comes out through a small hose. On that day, I had to distribute water to almost the entire laboratory because they were running low. However, it was a positive experience with the equipment since I learned more about it and helped the laboratory, which is the most important thing.
This is a very important piece of equipment, as it's where the water is purified and regenerated for conducting all the analyses in the laboratory. Well, hivers, I hope you enjoyed learning about the equipment in the laboratory and its water purification process.
Note: The photos were taken by me using my Tecno Go Spark cellphone.
Español:
Buenas hivers, hoy les voy a contar mi experiencia con el equipo de purificación de agua en el laboratorio donde trabajo.
Este equipo se usa para purificar el agua para usarla en experimentos en el laboratorio, donde el agua debe estar libre de contaminantes y de algunos iones que puedan influir en las mediciones analíticas realizadas al final del proceso.
Lo primero que hice al llegar al cuarto donde estaba el equipo fue encender la turbina que, por cierto, hace un ruido super molesto. Luego, el agua que entra de la calle es recopilada en un tanque y de ahí, por presión, llega a los filtros para pasar por los procesos de purificación.
Antes de empezar, todo hay que comprobar que el medidor de conductividad diga la hora del día, porque si hay un error en la hora, eso significa que el equipo puede estar dañado. Hay que revisar que en el medidor estén las sales que reaccionan con el agua, ya que esto forma parte de su proceso.
El funcionamiento del equipo es muy fácil, es como usar un celular táctil, simplemente le dices al equipo la cantidad de litros que quieres que purifique y por una manguerita sale el agua. Ese día tuve que repartirle agua a casi todo el laboratorio porque no tenían. Pero fue una experiencia buena con el equipo, ya que aprendí más de él y ayudé al laboratorio, que es lo importante.
Este es un equipo muy importante, ya que desde ahí se purifica y se regenera el agua para realizar todos los análisis en el laboratorio. Bueno, hivers, espero que les haya gustado el equipo que existe en el laboratorio y que hayan aprendido el proceso de purificación del agua y su importancia.
Nota: Las fotos fueron tomadas por mí, a través de mi celular Tecno Go Spark.