Happy monday morning guys. I bring you all a warm hugs from Nigerian. I pray that as you have been opportune to be among the living this week. May all you touch with your hands be fruitful. May all the things you do this week yeild better friuts in the Mighty Name of our Lord Jesus Christ. Amen.
So today i want to show you all this brecelate that i did for myself with lead wire and olive colour. I did it to appreciate my self. Not just doing alone. I want to tell myself that you have tried even in this hard times in my country Nigeria. I have survive it an i know that this too shall pass away with time.
Sometimes its always good to appreciate yourself nomatter how little it is. Because if you want to stay and look at your past you will realise that you have done great from then till now and you will still do more. So please take out time to appreciate yourself.
Materials.
Silver led wire
Olive shining beads
So i started by cutting out the led wire that i am to used for the brecelate. One is long and the other one is halve of the first one.
I bend the longer one into two, then i now used the second one to tie at the edge of the bending after keeping a litle bit of space at the edge, i curved it at the end after tieing.
From here now the next thing i did was to put one of the olive shinning beads at one side of the led wire, i used the led wire that i put one olive bead to bend it to the right side crosing the middle led wire.
I put another olive shining beads at the other side of the led wire then i also used the led wire to bend it to the left side crosing the middle of the led wire.
At the point the middle wire was left ontouch just to be giving access to the turning of the led wires after putting each of the olive shining beads
Ok till this poit i was moving ahead and making my brecelate to be on point. I continued putting the olive shining beads one after the other and crosing from the middle to the other side and also repeating the same thing at the remaining side of the led wire.
After doing that and seeing that it was almost at the length of my hands i decided to used one of the led wire and do some finishing touches by doing an intend rounding of the led wire on the remaining wire before i end my production.
At the end i had to just bend the upper side but before i bend it i made sure that i was able to cut out the lapses.
And finally this is my brecelate sitting pretty on my wrist.
Once agaian happy monday and thenks for passing through my post and also for you sweet and lovely comment.