Hola queridos amigos, hoy quiero mostrarles como hice un mini material de apoyo para la exposición de mi prima sobre el reciclaje. Espero que sea de su agrado al leer mi publicación.
Para empezar quiero decirles que no soy artista, aun así realicé cada cosa que verán solo a pulso, no calquee nada y les vuelvo a decir... no soy artista 😁😁😁.
Los materiales que utilicé fueron:
Hojas blancas pegadas
Portaminas
Borrador
Pinturas
Hello dear friends, today I want to show you how I made a mini support material for my cousin's recycling exhibition. I hope you enjoy reading my post.
To start, I want to tell you that I'm not an artist. Even so, I did everything you'll see freehand. I didn't trace anything. And again, I'm not an artist 😁😁😁.
The materials I used were:
White sheets glued together
Mechanical pencil
Eraser
Paint
Lo primero que hice fue con el portaminas hacer todo el fondo para que quede como borrador... realicé el titulo, los dibujos y los subtitulos, que fueron: el reciclaje, importancia, características y tipos.
The first thing I did was use the mechanical pencil to draw the entire background so that it looked like a rough draft... I made the title, the drawings, and the subtitles, which were: recycling, importance, characteristics, and types.
Para continuar escogí el primer color con el que iba a trabajar porque no quería cambiar de color y luego volver al mismo, entonces, usé uno de una sola vez y fue el verde. Lo mezclé con un poquito de blanco para que se viera más claro y empecé a usar en las letras del título, en el dibujo del fondo y en los dibujos que iban con los subtitulos.
To continue, I chose the first color I was going to work with because I didn't want to change colors and then go back to the same one, so I used one at a time: green. I mixed it with a little bit of white to make it look lighter and started using it in the title letters, in the background drawing, and in the drawings that went with the subtitles.
Then I added blue marker where appropriate, and then switched to black for the subtitles. When I finished and let it dry, I just added black marker to all the edges of everything I'd done.
Para terminar, hice en las orillas como olas de color amarillo para dar un toque final.
To finish, I made yellow waves on the edges to give a final touch.
Así quedó el material de apoyo que realicé... espero que les haya gustado.!!!
This is how the support material I made turned out... I hope you liked it!!!
Translated with https://www.deepl.com/translator