[Image1]
Introduction
Hey it's a me again @drifter1!
Today we continue with my mathematics series about Signals and Systems. There's much to talk about Signals and so let's first get into the Basics...
So, without further ado, let's get straight into it!
Signal Categorization
Continuous and Discrete Time
Signals are functions used for specific purposes, that can be split into two types based on how "often" samples are taken of them:
- Continuous Time - Independent Variable t
- Discrete Time - Independent Variable n
If samples are taken continuously, as time goes by (and so in respect to time itself), then the signal is of continuous-time, whilst when samples are taken after specific sampling intervals the signal is of discrete-time.
Deterministic and Non-Deterministic
Signals can also be categorized based on their deterministic or non-deterministic nature.
Deterministic
A signal is deterministic if there is no uncertainty in respect to its value at any instance of time. This basically means that a deterministic signal can be perfectly defined by a mathematical formula.
Non-Deterministic
On the other hand, non-deterministic signals are of random and so uncertain nature. Such signals can only be modelled in probabilistic terms.
Even and Odd
- Even: Signals that satisfy the condition x(t) = x(-t)
- Odd : Signals that satisfy the condition x(t) = -x(-t)
- x(t): "original" signal
- xe(t): even part of x(t)
- xo(t): odd part of x(t)
Periodic and Aperiodic
Signals are periodic when they repeat a specific pattern every time period T or sampling N.
Mathematically speaking, any signal that satisfies the following condition(s) is periodic:
Energy and Power
A signal is a energy signal if it has finite energy, whilst a signal is a power signal if it has finite power.
Its worth noting that a signal cannot be both, energy and power simultaneously, and that it may be neither of them.
Energy
The energy of a signal is calculated using:
Power
The power of a signal is calculated using:
Real, Imaginary and Complex
Lastly, signals are also categorized as real and imaginary:
- Real: A signal is real when it has no imaginary part, meaning that the imaginary part is zero.
- Imaginary: A signal is imaginary when it has no real part, meaning that the real part is zero.
An easy way to check if a signal is real or imaginary is using the complex conjugate of the signal:
Basic Signal Types
Unit Step Function
The unit step function, u(t), is defined as:
[Image 2]
This function is the best test signal.
Unit Impulse Function
The unit impulse function, δ(t), is defined as:
[Image 3]
Ramp Signal
The ramp signal, r(t), is defined as:
[Image 4]
Parabolic Signal
A parabolic signal t2/2can be easily defined using r(t) or u(t) as:
Signum Signal
Turning the unit step function into an odd function [u(t) = -u(-t)] creates the so called signum or sign function, sgn(x):
[Image 5]
Exponential Signal
Exponential signals are of the generic form:
The shape of the exponential depends on the value of the parameter a:
- a = 0 → e0 = 1
- a < 0 → decaying exponential
- a > 0 → raising exponential
Sinusoidal Signal
Any signal of the form:
or
[Image 6]
Sinc and Sampling Functions
The sinc function, sinc(t), is defined as:
The sampling function, sa(t), is defined as:
[Image 7]
RESOURCES:
References
- Alan Oppenheim. RES.6-007 Signals and Systems. Spring 2011. Massachusetts Institute of Technology: MIT OpenCourseWare, License: Creative Commons BY-NC-SA.
- https://www.tutorialspoint.com/signals_and_systems/
Images
Mathematical equations used in this article, where made using quicklatex.
Previous articles of the series
- Introduction → Signals, Systems
Final words | Next up
And this is actually it for today's post!
Next time we will dive even more into Signals...
See Ya!
Keep on drifting!