Easy and Simple Germination Box You Can Make for Less Than $10

A sampling of some of this year’s seed treasures.

“Of all the wonderful things in the wonderful universe of God, nothing seems to me more surprising than the planting of a seed in the blank earth and the result thereof.” ~Julie Moir Messervy

It’s time to start thinking about starting seeds for the coming garden season. Start your seeds right with this easy project. When you get your seeds started right, you make sure you have the best possible transplants for your garden.

One way to ensure good germination rates for your seeds is warmth, something in short supply this time of year in my area.

At the proper temperature, you seeds will germinate in days instead of weeks. You can see from the following chart that the temperature you want in your germination box is about 70 to 80 degrees.

Here’s another chart that shows how many days till seedlings appear. You want to make sure to get the sprouted seeds in the light as soon as they appear. Failure to do this with result in weak, spindly plants.

I use this homemade germination box to start all my early seeds. Soil blocks are my preferred starting medium. Using the Micro 20 Soil Block Maker allows me to start hundreds of seeds in this size box. Using 6 packs will still allow dozens of starts.

Here’s a shot of the Micro 20 Soil Block Maker

Here is the parts list

A plastic tote with a lid. Use whatever size works for your space and needs. The one pictured is about a 15 gallon size and cost about $6.

A light fixture with a metal reflector. Cost is about $2. Shown here disassembled.

A 25 watt lightbulb. Use a more or less wattage bulb to get the right temperature for your size tote and local conditions.

A piece of plywood to make a shelf above the light. This gives 2 levels for plant starting. The shelf I made is from a piece of scrap 1/2 inch plywood cut to fit the container.

Cut a hole in the side of your tote. Use the sleeve from your light fixture to determine the size of the hole. If you cut the hole slightly smaller than the sleeve, it will friction fit without any kind of glue. It should be centered on the longest side and near the bottom of your tote. Use the reflector piece to gauge the distance of the hole from the bottom.

Here’s what it looks like with the plastic sleeve installed in the hole.

Here’s what it looks like with all the pieces assembled.

From the outside...

And from the inside...

It’s done! Before you actually use your new germination box, check the temperatures with a thermometer. Make sure it’s not too cool or too hot. And remember, light bulbs get HOT! Keep flammables away from them.

Watch for my next post. I will show you how I start my seeds using the Soil Block Makers.

@steemithomestead

_________________________________________________________________

Thank-you for giving a few moments of your life to read my posts.

I really appreciate you for taking the time to do that!

Share more of my observations @beyondordinary

If you like the post, please encourage me with an Upvote and share my stuff by Resteeming or Sharing a link on your favorite Social Network sites.