Cordless drill is one of the most important power tools out of other modern types not only because it’s easy to use but also coming with several helpful features. So if you’re in the market today for a brand new drill, then I recommend you to get a lithium-ion drill type since this is one of the newest in the entire battery technology.
But how to use a cordless drill safe and easy? Check your answer below, but before that, you need to learn more about the basic structure of a cordless drill!
Top 7 Best Cordless Power Tool Brands -2018 Update
Basic cordless drill parts
There are several various models of cordless drill driver, but most of them share the same fundamental parts as below:
- The driver battery
Each cordless drill driver gets powered by the rechargeable battery and must arrive with one charger. On every little model, the battery needs to be detachable and can be removed from the tool when it’s time to recharge it. - The driver grip
This is just where your cordless drill driver gets held, and a few of drills own a textured rubber grip while some others only own the contours in the plastic surface from the casing. That textured rubber handle provides added grip in all moist conditions, and turn the drill driver more comfy than ever if you want it to hold much longer. - The speed control trigger
This type of cordless drill driver tends to run utilizing the speed control trigger. By only pulling the trigger, you can start the chuck turning. The further you try to pull it in, the quicker it tends to go as well as slow down, you might release the trigger.
Other basic parts include:
- Cordless drill driver LED light
- Forward and reverse button
- Torque control
- Gear selector switch
- Driver motor
They can range from $30 to $200 in price, and I used to have this once before, but then upgrade it into a stronger drill. It arrived with two batteries, one charger, a fabric case, the drill, and one screwdriver bit.
How to use a cordless drill safe and easy
- Select the right drill bit
Availing a bit made of the wrong material can cause your drill to break. Make sure to get the bit on wood, a masonry bit for brick, a high-speed steel bit on every metal, and a diamond-tipped bit on harder surfaces, like glazed tiles and porcelain tiles. - Fill the bit into the chuck
Attach the bit into the chuck
Based on the drill, you need to do this by hand, and only need one chuck key lying in the handle of the drill. Insert the drill bit into the chuck before tightening it again. - Clamp every piece together
Try to clamp it down solidly before drilling, and do not ever hold the piece down with one hand only during drilling since it can slip and hurt you. - Drill a shallow pilot hole
Drill a shallow hole
In different cases, you tend to receive better results when you begin with a drill smaller than the hole size. This hole can prevent the drill from slipping and decrease the chance of separating wood. - Adjust the clutch
If you have trouble penetrating the material, let’s raise the torque, or if you overdrive screws, or drill it too deeply, lower the torque.
Last but not least, when finding the drill stuck in the material, don’t pull it out too hard by running your drill. Unplug it and separate the bit and the chuck before removing the bit with manual tools
Related Posts:
How to drill a 4-inch hole fast and easy in wood
How to cut a circle in wood with a drill?