This is how I got to do love or heart shape design which you can use as your throw pillow or as design on your bedcover which I did, I use it to design bed cover.
Process of doing it. 👇
I draw out the length and make a draw of a heart shape on my fabric.
The length I use 14inches while for d width I use 13inches.
After that I cut out the plain material to use as interface, then I use the exact measurements and shape to cut out foam to make it puffing. I use 1/2 inches foam because I don't want it to be too puffing base on what I want to use it for.
Next is sewing, I place the foam on the fabric and sew it round.
After that I cut my stripe to make a ruffles at the edge round which is 2.5 inch in width and I cut enough length to make the ruffles.
Then I place it on the right side of the fabric to make the ruffles.
Then I place the interface on the right side before sewing, at the end of sewing the seam allowance will all be inside.
This how it turn out.
Moving from that I cut out the material I use for the interface to make a bow flower design on it, I cut out 9inches by 9inches on fold and 1.5inches of the main fabric to hold the bow flower at the middle.
Then I proceed to sewing it round and turn it and gather the Plinting at the middle which turn out this way. 👇
So I place it at the centre of the design and tack it down.
Then I proceed to place it on the bedcover, I got the centre of the bedcover and I measure 15 inches from the centre to the left and right that's where I position the design and sewing it on it and it makes it beautiful and attractive.
You can also try this out on your own.