Hello friends how are you, today I show you a sketch I made of a cat, like the previous sketch for this I needed a sketchbook and a pencil, I started drawing with a 7mm mechanical pencil and a 2B graphite, you could use whatever you would like, and the first thing I did was define the shape of the head, I drew a line going down the center, starting at the top and in the center, then I slowly went down the center of the page with short lines. I went back to the center and drew another line that goes from left to right, I used those lines to create a circle in the center of the page and define the most basic shape of the head, from the center I went up to the top of where the circle was and marked it. Then I measured the distance from the center down and repeated this on the horizontal line, then I measured the distance from the center to the top left and then to the right, later I connect the center point in each mark with a curve to create the circle. This didn't have to be perfect, I just used it as a guide. After a whole process, I started with the eyes, the position between the center line and the outside of the circle. I drew a circle around that center point for the eye. Then I adjusted the shape of the head by adding details and refining the shapes. Finally, I adjusted the shadows and signed the work. And that's how I completed the cat sketch illustration. I hope you liked it✨🙏🏻
