- log - displays events from the switch
- show mac A6 - This will display mac-address of the device on port A6.
- show vlan - Shows information about vlans on the switch database
- Vlan 20 - sets the switch to vlan 20
- Untag - this is used to set the data port on the switch
- tag - sets the port for a tagged vlan, generally used for telephones.
- show flash - displays flash version
- show run - shows running config of the switch
- enable - switch to manager level
These are the basic commands used to manage a switch or set it up. Thanks for reading.
Regards,
@trev03