Scientists have now prepared three-d (printed) printed rubber materials, which will automatically be repaired when the tires of the built-in rails. Shoes from this rubber can also be made Researchers at the Southern California University of America have developed this rubber. This step is extremely important in the world of soft robotics and electronics. This will reduce production time and product age will increase for a long time.
This is a 3D-printed mated in which photopolymerization is used. In this process, the fluid is stored using the light. Photopolymerization is obtained after several reactants in many chemical groups called thiols. After this the oxidizer is converted into another group desegregated in this equation.
This is the disfidelged group in which it has the ability to automatically recover after it breaks. Quiming Wang, assistant professor of the University, explained that the balance of each component is very important in this process. Researchers have said that the items made from this rubber are in the cutting and bursting of the repairs of only 17.5 square millimeters in five minutes. It can be completely repaired in a few hours.
NPG has published this study in Asia Matteries. It was told that if a tire has been cut in the middle. So at 60 degrees Celcius temperature it will be correct in two hours. Scientists have said that it can be corrected further on increasing the temperature.