Hello Friends!
Ok so in this screenshot you can see a small experiment of mine in Burstcoin Solo mining.
Now at that time I had 26858 GB or 26.8 TB, now I have over 38 TB.
I started the program for 3-4 hours and then I checked my screen to see my stats and this is what I saw.
My chance to find a block started from 0.005% and went up to little bit over 0.009%
It was a good experiment but of course this is still not a viable solution for the moment for me.
Monitoring the Burstcoin Mining Pools
Now just write the burst mining pool in your web search bar, for me it was this one:
https://50-50-pool.burst.cryptoguru.org/
Ok so in this image you can see that my effective mining is increasing slow but sure, now it is over 36 tb and soon it will be the actual 38 tb.
At the time that I was monitoring my rig I saw Crypto Froggie or @kirakero (I hope I got here account right she made very good videos on burstcoin mining on youtube)
At the time of making this post I saw 1tb increase so that is great !
For GPU mining you can use these sites:
https://whattomine.com/coins
There you can put ou gpu-s and see what is the estimated profit and most profitable coin to mine-
My card is rx 570 and calculation:
I can say that the calculation is accurate in my case
Now I also made some changes to increase my hashrate from 14.2 Mh/s on ether mining to 15.2 15.3 Mh/s
I wrote in my previous post that I experimented claymore dual ether/dered miner.
I Noticed that decred had a very big difficulty and so I deleted it from the STAR.BAT file
Now the command for START.bat is as follows:
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x
This makes the dual miner into a simple ether miner.
Please notice that ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F is just and example wallet address and you will have to put your own address.
The wallet started to mine ether just fine and in few seconds I got some shares
In this screenshot you can see my shares
Now for education purposes only I share with you also how much 15 MH/s of Ether mining will cost on trusted cloud mining sites:
On Hashflare a 15 MH/s contract for 1 Year will be 270 $ currently one of the cheapest. (But for the moment is limited)
On CCG Mining a 15 MH contract for 2 Years will be 419.85 $
Pros and cons
Pros
On both companies there is NO maintenance for ether mining.
Cons
Limited time
Different prices
Now if you have at home a ether miner and mine in a pool.
- You help the ether ecosystem
- the gains are virtually unlimited (as your miner will be alive)
- can stop at any moment and re purpose the gpus or sell them for better ones to build a better miner.
-CAN find a block and have a big split of the rewards.
Cons:
Noise
Heat
mental stress ( if you are close to the miner...or God forbid it is actually in your room)
electric bill
Previous posts about the subject:
https://steemit.com/tutorial-trail/@cynetyc/3-coins-one-tiny-mining-rig-burstcoin-ether-decred
https://steemit.com/tutorial-trail/@cynetyc/burstcoin-effective-mining-capacity-in-a-pool
https://steemit.com/tutorial-trail/@cynetyc/burstcoin-turbo-plotter-9000-and-unlimited-review-and-test
https://steemit.com/tutorial-trail/@cynetyc/my-burstcoin-mining-rig-upgrade-part-1
https://steemit.com/tutorial-trail/@cynetyc/my-burstcoin-mining-rig-upgrade-part-2
https://steemit.com/tutorial-trail/@cynetyc/burst-mining-rig-upgrade-part-3
https://steemit.com/tutorial-trail/@cynetyc/my-response-video-to-linus-tech-tips-video-about-mining-burstcoin
If you want to pick a contract on CCG Mining :
http://bit.ly/CCGCynetyc
Or a contract on hashflare :
http://bit.ly/HashFlareCynetyc
Until next time I will end my message here and I do hope it was to some use to you! Cynetyc Out!
