rod.evans.visual

Light painting I did last year with Rena from @reactcircus Tool used was a @fotorgear Magilight. This was a single exposure that I then mirrored in @mirror_lab: 18mm, f/3.5 ISO-800, 6secs

Double exposure edited in Photoshop.

Playing around in @mirror_lab with one of my Milky Way/Light Painting shots.

A shot from a light painting and body art workshop that myself and @creatrix.pixie.mama hosted last year. Tool used here was the @fotorgear Magilight (with a sparkler stuck on the end of it). Huge thanks

Light painting under the Milky Way

Doing some light painting at home. It was about 3pm and full daylight outside. I captured this using my Sony camcorder and then processed the footage through TouchDesigner to get the trails. I got the

Tool used was a green acrylic tube with a purple plastic tip and a sparkler taped on the end. Torch used was a Nitecore P26. Check out pix of the tool below. Single exposure: 43mm, f/9 ISO-100, 2.8secs

Tool used was a PVC pipe (with slots and holes cut in it) attached to the RGB control unit of the @buyfiberflies Pixel Whip. See pix of the pipe below. Single exposure: 10mm, f/4.5 ISO-400, 84secs Artwork

I accidentally made a butterfly in my studio last night. This was done in one single motion using a tool made up of a Nitecore P26 torch with a purple acrylic tube and green plastic tip taped on the end,

Throwback to this rainbow flame onion looking thing I conjured up in a storm-water tunnel one night. Tool used was a clear acrylic rod attached to a FiberFlies Pixel Whip control unit. Stuck to the end

Light painting on the beach with the lovely Lee Bliss. Tool used was a green acrylic tube with a purple plastic tip taped on the end. See below for pix of the tool. Single exposure: 18mm, f/3.5 ISO-1600,

An orb I created a few years ago at Tosha Falls in NSW, Australia. The tool I used here consists of a bunch of 2ft long plastic drinking straws that I attached to a torch. Here's a tutorial I made that

I made this flower in one continuous stroke using a blue acrylic tube with an orange M&M's container taped on the end. Torch used was a Nitecore P26. See below for pix of the tool. Single exposure:

Light painting on the beach with Lee Bliss. Tool used was a purple acrylic tube with a pink plastic tip taped on the end. Torch used was a Nitecore P26. See pix of the tool below. Single exposure: 18mm,

Did some light painting in my home studio tonight. Tool used was a clear acrylic tube with a sparkler attached on the end. Torch used was the Double Dragon from @lightexcursion. Single exposure: 43mm,

Just found this light painting image I did in the old train tunnel. It has a bit of a warm, lovey, hearty, rosey feel to it so I thought I'd share ❤️🌹 Tool used here was the acrylic shaft of an LED umbrella.

Throwback to a poolside orb I did a couple of years ago under the Milky Way. Tool used was the acrylic shaft of an LED umbrella (available cheap on eBay). Single exposure: 10mm, f/4.5 ISO-3200, 30secs

Captured in my backyard near Byron Bay, Australia. Tools used here were two coloured acrylic tubes. The red tube has a purple plastic tip taped on the end and the blue tube has an orange M&M's container

Playing around with light in my friends backyard last Saturday night. Tools used were a yellow acrylic tube with a red M&M's container taped on the end (see pix below). My friend had LED string lights

A spiralled orb I made on an ocean-view balcony next to the Byron Lighthouse recently. Tool used was a yellow acrylic tube with a red M&M's container taped on the end (see pix of the tool below). Single