This post is part 2. you can read part 1 here:
@bigorna1/diy-water-structuring-device
Early morning today I drove to a near village to collect pebbles from the river bed. to my surprise, there was still water running which is very unusual for this time of year and this complicated the task at hand. I still did manage to come back with enough pebbles for the job though.
also, I got inspired to write another post about an old Roman bridge under which I was collecting the stones. you can read about it here:
@bigorna1/over-2000-years-old-bridge
a bit of background. the filter housing has a direction of flow and it is important to pay attention to it. an "IN" and an "OUT" mark this direction.
this image shows the flow through the whole system from entry to exit.
since dealing with water that supposedly carries all of the memory in our realm, I took very seriously the selection of the stones.
I wanted stones of different compositions, magnetisms, colors, crystals etc.
the location under the bridge was also not coincidental. imagine the amount of "water that has passed under this bridge"... over the and what these stones store as knowledge and memories.
another key part for me was setting the intention. I believe our intentions have effect in our reality and hence every though counts towards the desired effect.
some crystals added into the mix to add their powers.
then, I carefully placed the stones into the housing, slowly, one by one, making sure that the stones up top do not go over the O-ring line (even though, there is a bit more free space up there).
important is to secure the central PVC tube nicely centered so as to fit into the cover.
and Voilá ! put the cap on and tighten.
and lastly for today, wrap all threads with Teflon tape and then install in place and hand tighten.
next up will be installing inline and testing for performance in some point next week, so stay tuned for part 3 !
thank you for stopping by 🙏
wishing us all a peaceful week
published at 11:11
@ligayagardener